Entegris GateKeeper® HGU Heated Getter Gas Purifiers
Entegris GateKeeper® HGU Heated Getter Gas Purifiers – These PS2, PS3, PS4 heated getter point-of-use gas purifiers utilizes the only purifier technology capable of removing methane and nitrogen from process gases. Gases purified include N₂, H₂, Ar, He and Xe.
Point-of-use (POU) gas purification ensures consistent and repeatable process performance, isolates critical process areas from house gas distribution systems, and protects against gas purity upsets and cross contamination.
Provides the most complete removal of impurities for rare gases, nitrogen, and hydrogen, with high reliability, low cost, and high performance. Outlet impurity levels for O2, H2O, CO, CO2, H2, CH4, and N2 (from rare gas only) are reduced to low parts per billion (ppb) levels or below.
The heated getter material forms irreversible chemical bonds with any oxide, carbide, and nitride impurities.
Optimized design provides sub-ppb performance, which is better than gas from cylinder or liquid sources, in small footprints with max flow rates from 0.2 slpm up to 150 slpm (9 Nm3/hr).
Available in 110 – 120 VAC or 220 – 240 VAC.
PS2-GC50
- Gas purified: Nitrogen, Helium, Argon.
- Flowrate 20 to 200 sccm.
- Small and economical purifier for Gas Chromatography (GC) and other low flow analytical applications with critical carrier gas purity requirements.
- Standard voltage heater (no control unit) with virtually no maintenance.
PS3-MT3
- Gas Purified: Nitrogen, Helium, Argon, Xenon.
- Max Flowrate 5 slpm.
- Fully automatic controller with fault protection and audible alarm.
- High temperature protection.
- Replaceable getter cartridge for fast, easy maintenance.
- Optional features: Bypass assembly (Part # BYPS-3) allows isolation of cartridge while maintaining gas flow.
PS4-MT3, PS4-MT15
- Gas purified: Nitrogen, Hydrogen, Helium, Argon, Xenon.
- Max Flowrate 50lpm (MT3) to 75slpm (MT15).
- Integral inlet/outlet valves and automatic bypass valve.
- Fully automatic controller with fault protection and audible alarm.
- High temperature protection.
- Life status sensor provides early warning of impending breakthrough of impurities (rare gases and nitrogen only).
- Surface mountable enclosure with cooling fan.
- Replaceable getter cartridge for fast, easy maintenance.
- Facility requirement – Instrument air (clean dry air or nitrogen filtered to 10 µm) 80 to 100 psig.
- Complies to ASME pressure vessel code section VIII.
PS4-MT50
- Gas purified: Nitrogen, Helium, Argon, Hydrogen, Xenon.
- Max Flowrate 150slpm.
- High Temperature Alarm.
- PLC Control Operation.
- Exhausted enclosure with separate electronics bay.
- Life status indicator provides early warning of impending breakthrough of impurities.
- Optional features: Emergency off button, Manual bypass, N2 purge system (hydrogen model only), Hydrogen leak detector (hydrogen model only).
- Facility requirement – Instrument air (clean dry air or nitrogen filtered to 10 µm) 60 to 110 psig.
- Complies to ASME pressure vessel code section VIII.
Contact us today to find out more about Entegris Gas Purification Systems.
Processgard Cartridge Filter
Browse through our Processgard Cartridge Filter and other filtration products